Deutsch
English
Français
Spare Parts W.S. TYLER® Ro-Tap®
W.S. TYLER® Ro-Tap® RX-29 and RX-30
The numbering of the items in the picture (download here) corresponding to the position in the table below and allows you a correct assignment of the original part numbers from W.S. TYLER®.
By clicking on the part number you go directly to our e-shop of HAVER particle analysis. There you can order the item quickly and easily online.
Click here or on the image to the left to see a detailed view.
| Item | Description | Part No. |
|---|---|---|
| 1 | Base | 107770 |
| 2 | Hammer | R-20029 |
| 3 | Hammer Block | R-20023 |
| 4 | Sheet Guard | R-30019 |
| 5 | Rotating Guard | R-30010 |
| 6 | Lift Rod | R-10036 |
| 7 | Upper Main Shaft Washer | R-10038 |
| 8 | Main Shaft | R-20027 |
| 9 | Upper Carrying Plate (plastic) RX-29 | R-30008 |
| 9A | Upper Carrying Plate (aluminium) RX-29 | R-30008-1 |
| 9B* | Upper Carrying Plate (steel) RX-30 | R-30027 |
| 10 | Lower Carrying Plate | R-30009 |
| 12 | Cam Gear | R-20039 |
| 13 | Timing Belt Pulley | R-30015 |
| 14 | Eccentric Disc | R-10034 |
| 15 | Block | R-10032 |
| 16 | Sieve Cover Ro-Tap® RX-29 | R-30007 |
| 16A | Sieve Cover Ro-Tap® RX-30 | R-30011 |
| 17 | Sieve Support Plate RX-29 | R-30006 |
| 17A | Sieve support plate RX-30 | R-30013 |
| 18 | Sieve support clamp bar RX-29 | R-30023 |
| 18A | Sieve support clamp bar RX-30 | R-30022 |
| 19 | Backup Plate | R-20019 |
| 20 | Bearing Plate | R-20020 |
| 21 | Shield | R-20033 |
| 22 | Tube Spacer | R-10028 |
| 23 | Cam Shoulder Screw | R-10029 |
| 23A | 1/2" I.D. Shim | 106582 |
| 24 | Main Shaft Key to Eccentric | R-10042 |
| 25 | Main Shaft Key - Lower | R-10039 |
| 26 | Hammer Pin | R-10035 |
| 27 | Cork Plug | R-10066A |
| 29 | Tie Rod | R-10033 |
| 30 | Motor Adaptor | R-30018 |
| 31 | Grommet | ZA11167 |
* position not marked
| Item | Description | Part No. |
|---|---|---|
| 32 | Lift Rod Coupling (2 1/2" lg.) | R-10030 |
| 33 | Pedestal Cover | R-40011 |
| 34 | Flange Bearing | R-10061 |
| 35 | Bearing | R-10062 |
| 36 | Flange Bearing | R-10063 |
| 37 | Thrust Washer | ZF-10168 |
| 38 | Steel Bushing | R-10065 |
| 39 | 3/8-16 NC x 2,25" Carriage Bolt | ZF-10174 |
| 40 | Sprocket-14 teeth (1800 RPM) w/Set Screw | R-10070 |
| 40 | Sprocket-17 teeth (1500 RPM) w/Set Screw | R-10048 |
| 41 | Electronic timer (110 V/50 Hz) | R-40029 |
| 41 | Electronic timer (230 V/60 Hz) | R-40037 |
| 41A | Timer Mounting Clip | R-40040 |
| 42 | Motor Standard 115/230 V, 60/50 Hz 1 Phase | P-1500-23 |
| 42A | 3/8-16 x 1" long Hex Head Screw | ZF-10183 |
| 42B | 3/8 I.D. Flat Washer | ZF-10168 |
| 43 | Timing Belt | R-10058 |
| 44 | Shim | R-10055 |
| 45 | 1/2-13x2,50" long Hex Hd. Bolt | ZZ-10068 |
| 45A | 1/2 I.D. Lock Washer | ZZ-10323 |
| 47 | Clamp Screw | R-10079 |
| 48 | 3/8" Lock Nut | ZF-10221 |
| 49 | 1/2" Lock Nut | ZF-10222 |
| 50 | 10-32x0,50" long Flat Head Socket Cap Screw | ZF-10231 |
| 51 | 3/8-16x.75" long Flat Head Socket Cap Screw | ZF-10241 |
| 51A | 3/8-16x.1" long Hex Head Screw (replaces ZF-10183) | ZF-10240 |
| 52 | 3/8-16x.62" long Hex Hd. Screw | 114162 |
| 53 | 5/16-24x1.25" long Socket Head Cap Screw | ZF-10251 |
| 54 | handles for sieve support plate (=1 pair) | R-20082 |
| 55 | #10-24x.25" Socket hd. Set Screw | ZA-10148 |
| 56 | 3/8 I.D.x1.50" O.D. Fender Washer | ZF-10271 |
| 60* | Timer Cord w/Plug | R-10018 |
| 61* | Straight Connector (APC-050) | R-10112 |
| 62* | Flexible Conduit | 107764 |