Sieve Analysis of up to 3 kg Sample Weight

W.S. TYLER® Ro-Tap® RX-29 for dry sieving

W.S. TYLER® Ro-Tap® RX-29
W.S. TYLER® Ro-Tap® RX-29

The W.S. TYLER® Ro-Tap® RX-29 for test sieves up to 203 mm diameter reproduces the circular and tapping motion of hand sieving but with an even mechanical action. The W.S. TYLER® Ro-Tap® RX-29 is manufactured by W.S. TYLER®, the American subsidiary of HAVER & BOECKER.

Most suitable machine for abrasive materials

  • Enables sieving of agglomerating bulk materials.
  • Prescribed in the FEPA-standard for abrasive industry.

Further advantages at a glance

  • The 2D sieving action saves time and manual re-sieving.

  • Easy handling – only sieving time has to be set.


W.S. TYLER® Ro-Tap® RX-29 - application examples

  • Diamonds
  • AbrasivesMetal powder and metal swarf
  • Powder
  • Tobacco
  • Cacao
  • Mining Industry

Suitable test sieves for your application

It depends on your application which test sieves should be used for sieve analysis with the W.S. TYLER® Ro-Tap® RX-29. It is suitable for up to 6 test sieves with full height or 13 half-height sieves and one sieve pan with a diameter of up to 203 mm (8”) or 200 mm.

Please note that the W.S. TYLER® Ro-Tap® RX-29 without cupboard does not reach the requirements of CE-labelling. We therefore recommend to use the CE-execution with safety cupboard with external control gear (W.S. TYLER® Ro-Tap® RX-29 CE).

Technical data

 Sieve diameters 200 mm, 203 mm (8")
 Sample weight approx. 3 kg
 Operating voltage 230 Volt or 115 Volt, 50-60 Hertz
 Timer 0-99 minutes
 Taps per minute 150
 Oscillations per minute 278
 Drive electric motor with worm gear
 Sound emission 86 dB
 Weight ca. 82 kg (without test sieves)
 Dimensions 710 x 540 x 640 mm (B x T x H)



E-Shop Particle Analysis

With this E-Shop button the required test sieve shaker can be specified directly.

Click here to find all spare parts for W.S. TYLER® Ro-Tap®.

Learn more...

W.S. TYLER® Ro-Tap® RX-29 and RX-30

The numbering of the items in the picture (download here) corresponding to the position in the table below and allows you a correct assignment of the original part numbers from W.S. TYLER®.

By clicking on the part number you go directly to our e-shop of HAVER particle analysis. There you can order the item quickly and easily online.

Click here or on the image to the left to see a detailed view.

ItemDescriptionPart No.
3Hammer BlockR-20023
4Sheet GuardR-30019
5Rotating GuardR-30010
6Lift RodR-10036
7Upper Main Shaft WasherR-10038
8Main ShaftR-20027
9Upper Carrying Plate (plastic) RX-29R-30008
9AUpper Carrying Plate (aluminium) RX-29R-30008-1
9B*Upper Carrying Plate (steel) RX-30R-30027
10Lower Carrying PlateR-30009
12Cam GearR-20039
13Timing Belt PulleyR-30015
14Eccentric DiscR-10034
16Sieve Cover Ro-Tap® RX-29R-30007
16ASieve Cover Ro-Tap® RX-30R-30011
17Sieve Support Plate RX-29R-30006
17ASieve support plate RX-30R-30013
18Sieve support clamp bar RX-29R-30023
18ASieve support clamp bar RX-30R-30022
19Backup PlateR-20019
20Bearing PlateR-20020
22Tube SpacerR-10028
23Cam Shoulder ScrewR-10029
23A1/2" I.D. Shim106582
24Main Shaft Key to EccentricR-10042
25Main Shaft Key - LowerR-10039
26Hammer PinR-10035
27Cork PlugR-10066A
29Tie RodR-10033
30Motor AdaptorR-30018

* position not marked

ItemDescriptionPart No.
32Lift Rod Coupling (2 1/2" lg.)R-10030
33Pedestal CoverR-40011
34Flange BearingR-10061
36Flange BearingR-10063
37Thrust WasherZF-10168
38Steel BushingR-10065
393/8-16 NC x 2,25" Carriage BoltZF-10174
40Sprocket-14 teeth (1800 RPM) w/Set ScrewR-10070
40Sprocket-17 teeth (1500 RPM) w/Set ScrewR-10048
41Electronic timer (230 V, 50 Hz)R-40029
41Electronic timer (110 V, 60 Hz)R-40037
41ATimer Mounting ClipR-40040
42Motor Standard 115/230 V, 60/50 Hz 1 PhaseP-1500-23
42A3/8-16 x 1" long Hex Head ScrewZF-10183
42B3/8 I.D. Flat WasherZF-10168
43Timing BeltR-10058
451/2-13x2,50" long Hex Hd. BoltZZ-10068
45A1/2 I.D. Lock WasherZZ-10323
47Clamp ScrewR-10079
483/8" Lock NutZF-10221
491/2" Lock NutZF-10222
5010-32x0,50" long Flat Head Socket Cap ScrewZF-10231
513/8-16x.75" long Flat Head Socket Cap ScrewZF-10241
51A3/8-16x.1" long Hex Head Screw (replaces ZF-10183)ZF-10240
523/8-16x.62" long Hex Hd. Screw114162
535/16-24x1.25" long Socket Head Cap ScrewZF-10251
54handles for sieve support plate (=1 pair)R-20082
55#10-24x.25" Socket hd. Set ScrewZA-10148
563/8 I.D.x1.50" O.D. Fender WasherZF-10271
60*Timer Cord w/PlugR-10018
61*Straight Connector (APC-050)R-10112
62*Flexible Conduit107764

Particle Analysis | Phone: +49 (0) 25 22 - 30 131 | Fax: +49 (0) 25 22 - 30 152 |
Dynamic Image Analysis | Phone: +49 (0) 25 22 - 30 150 | Fax: +49 (0) 25 22 - 30 152 |