Sieve Analysis of up to 3 kg Sample Weight
HAVER EML 200 Pure for dry sieving
The new generation of HAVER EML 200 for test sieves with diameters of up to 203 mm can be used for dry and wet sieving of 3 kg bulk material maximum. It is the smallest 3D laboratory sieve shaker with an electromagnetic drive of HAVER & BOECKER. You can set and store sieving time, interval and amplitude for reproducible sieving results.
Further advantages at a glance
- two given regulated amplitudes to select from (fine and coarse)
- set interval (10 sec.)
- digital timer
- evaluation software CSA 5.0 basic license included when purchasing a new EML 200 test sieve shaker
|Sieve diameters||50 mm - 203 mm|
|Sample weight||approx. 3 kg|
|Weight of sieve set||maximal 8.7 kg|
|Operating voltage||110 - 230 Volt, 50 - 60 Hertz|
|Amplitude||two given regulated amplitudes to select from (fine and coarse)|
|Timer||0-99 minutes or permanent operating|
≤ 70 dBA
|Weight||approx. 37 kg (without test sieves)|
|Dimensions||385 x 285 x 900 mm (D x W x H)|
HAVER EML 200 Pure - application examples
- Industrial rocks and minerals
- Fertilizer and seeds
- Cat litter
- Soil testing
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the HAVER EML 200 Pure. It is suitable for up to 9 test sieves with normal height (200x50 mm) or 15 sieved with reduced height (200x 32 mm) and one sieve pan with a diameter of up to 203 mm (8”) or 200 mm.
We offer test sieves from 20 micron up to 125 mm according to your requirements or you can take a standard sieve set with following specifications:
|Dimensions:||Test Sieves 200 x 50 mm according to DIN ISO 3310-1 / ASTM|
|Openings:||45 µm, 63 µm, 125 µm, 250 µm, 500 µm, 1 mm, 2 mm, 4 mm, sieve pan|
E-Shop Particle Analysis
With this E-Shop button the required test sieve shaker can be specified directly.
HAVER EML 200 Pure
The numbering of the items in the picture corresponding to the position in the table below and allows you a correct assignment of the original part numbers from HAVER EML 200 Pure.
By clicking on the part number you go directly to our e-shop of HAVER particle analysis. There you can order the item quickly and easily online.
Click here or on the image to the left to see a detailed view.
|Pos.- No.||Quantity||Description||Article No.|
|1||2||Nuts Classic „eco“||206762504|
|2||1||Cover with inspection glass||205325236|
|3||2||Guide rods, clamping system Classic „eco“, 660 mm long||206515797|
|4||1||Front panel with control board||On demand|
|5||1||Rubber ring for vibration body ∅ 204 / ∅ 160||205326189|
|6||1||Main switch (not shown in the drawing)||205327766|
|7||1||Precision fuse, 20x5 mm, 3.15 Ampere MT 250 V (not shown in the drawing)||200357362|