Sieve Analysis of up to 6 kg Sample Weight
W.S. TYLER® Ro-Tap® RX-94 with two sieve sets for dry sieving
The W.S. TYLER® Ro-Tap® RX-94 for test sieves up to 203 mm diameter can take 2 sieve sets simultaneously. It reproduces the circular and tapping motion of hand sieving but with an even mechanical action. It is manufactured by W.S. TYLER®, the American subsidiary of HAVER & BOECKER.
Simultaneous analysis of 2 samples.
The 3D sieving action saves time and manual re-sieving.
Enables sieving of agglomerating bulk materials.
Easy handling – only sieving time has to be set.
|Sieve diameters||200 mm, 203 mm (8")|
|Sample weight||approx. 2 x 3 kg|
|Operating voltage||230 Volt, 50-60 Hertz|
|Taps per minute||150|
|Oscillations per minute||278|
|Drive||electric motor with worm gear|
|Sound emission||86 dBA (without sound enclosure cabinet)|
|Weight||approx. 100 kg (without test sieves)|
|Dimensions||750 x 680 x 560 mm (B x T x H)|
Application examples for the W.S. TYLER® Ro-Tap® RX-94
Metal powder and metal swarf
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the W.S. TYLER® Ro-Tap® RX-94. It is suitable for up to 12 test sieves with full height or 26 half-height sieves and two sieve pans with a diameter of up to 203 mm (8”) or 200 mm.
Please note that the W.S. TYLER® Ro-Tap® RX-94 without cupboard does not reach the requirements of CE-labelling.We recommend to use a sound enclosure to reduce the sound emission.
- Brochure Particle Analysis
(PDF, 1.9 MB)
E-Shop Particle Analysis
With this E-Shop button the required test sieve shaker can be specified directly.
Click here to find all spare parts for W.S. TYLER® Ro-Tap®.