Sieve Analysis of up to 6 kg Sample Weight
W.S. TYLER® Ro-Tap® RX-30 for dry sieving
The W.S. TYLER® Ro-Tap® RX-30 for test sieves up to 305 mm diameter reproduces the circular and tapping motion of hand sieving but with an even mechanical action. The W.S. TYLER® Ro-Tap® RX-30 is manufactured by W.S. TYLER®, the American subsidiary of HAVER & BOECKER.
Most suitable machine for abrasive materials
Enables sieving of agglomerating bulk materials.
Prescribed in the FEPA-standard for abrasive industry.
Further advantages at a glance
The 3D sieving action saves time and manual re-sieving.
Easy handling – only sieving time has to be set.
|Sieve diameters||300 mm, 305 mm (12")|
|Sample weight||approx. 6 kg|
|Operating voltage||230 Volt or 115 Volt, 50-60 Hertz|
|Taps per minute||150|
|Oscillations per minute||278|
|Drive||electric motor with worm gear|
|Sound emission||86 dBA|
|Weight||approx. 82 kg (without test sieves)|
|Dimensions||710 x 540 x 640 mm (B x T x H)|
W.S. TYLER® Ro-Tap® RX-30 - application examples
Metal powder and metal swarf
- Mining Industry
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the W.S. TYLER® Ro-Tap® RX-30. It is suitable for up to 5 test sieves with full height or 12 half-height sieves and one sieve pan with a diameter of up to 305 mm (12”) or 300 mm.
Please note that the W.S. TYLER® Ro-Tap® RX-30 without cupboard does not reach the requirements of CE-labelling. We therefore recommend to use the CE-execution with safety cupboard with external control gear (W.S. TYLER® Ro-Tap® RX-30-CE).
- Brochure Particle Analysis
(PDF, 1.9 MB)
E-Shop Particle Analysis
With this E-Shop button the required test sieve shaker can be specified directly.
Click here to find all spare parts for W.S. TYLER® Ro-Tap®.