Sieve Analysis of up to 3 kg Sample Weight
W.S. TYLER® Ro-Tap® RX-29 with CE labelling
The W.S. TYLER® Ro-Tap® RX-29 CE for test sieves up to 203 mm diameter reproduces the circular and tapping motion of hand sieving but with an even mechanical action. It differs from the W.S. TYLER® Ro-Tap® RX-29 in the safety cupboard which is necessary for CE conformity.
Most suitable machine for abrasive materials
- The safety cupboard meets the demands of job safety that are necessary for CE-labelling in Europe.
- Enables sieving of agglomerating bulk materials.
Prescribed in the FEPA-standard for abrasive industry.
Further advantages at a glance
- The 3D sieving action saves time and manual re-sieving.
- Easy handling – only sieving time has to be set.
|Sieve diameters||200 mm, 203 mm (8")|
|Sample weight||approx. 3 kg|
|Operating voltage||230 Volt or 115 Volt, 50-60 Hertz|
|Taps per minute||150|
|Oscillations per minute||278|
|Drive||electric motor with worm gear|
|Sound emission||70 dBA|
|Weight||ca. 124 kg (without test sieves)|
|Dimensions||890 x 610 x 740 mm (B x T x H)|
W.S. TYLER® Ro-Tap® RX-29 CE - application examples
Metal powder and metal swarf
- Mining Industry
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the W.S. TYLER® Ro-Tap® RX-29 CE. It is suitable for up to 6 test sieves with full height or 13 half-height sieves and one sieve pan with a diameter of up to 203 mm (8”) or 200 mm.
The W.S. TYLER® Ro-Tap® RX-29 CE is integrated in a safety cupboard and can only be started by means of an external control gear when the cupboard is closed. This provides job safety as injuries caused by the circular and tapping motion of the test sieve shaker are prevented.
- Brochure Particle Analysis
(PDF, 1.9 MB)
E-Shop Particle Analysis
With this E-Shop button the required test sieve shaker can be specified directly.
Click here to find all spare parts for W.S. TYLER® Ro-Tap®.